Pilodist

PETRODIST 400 S semi-automatic combination system

Crude oil distillation system for semi-automatic operation according to

ASTM D-2892 (TBP)
ASTM D-5236 (Potstill)

The PETRODIST 400 S is a combination system for alternative operation of the following systems

* PETRODIST 100 S
* PETRODIST 200 S

The central fraction collector is used for both PETRODIST 100 S as well as PETRODIST 200 S. The vacuum supply, the cryostat/ thermostat and the control station are also used for both systems. The unit requires water, nitrogen, compressed air and electricity. Dry ice or liquid nitrogen is required for cold traps.

The cuts are taken automatically according to the pre-selected boiling temperature or when the receivers are filled up. The vacuum tight fraction collector contains 9 receivers.

All necessary accessories will be supplied together with the system. The installation requires water, nitrogen, compressed air and electricity.


Technical Data

  Equipment for ASTM D-2892 (PD100)
flask-size Available flask sizes 2, 4, 6, 10, 20 L
pressure Operating pressure vacuum down to 1 Torr
temperatur Operating temperature up to 350° C (660° F)
temperatur Final cut temperature up to 565° C AET (1050° F)
  Equipment for ASTM D-5236 (PD200)
flask-size Available flask sizes 2, 4, 6, 10, 20 L
pressure Operating pressure vacuum down to 0.1 Torr
temperatur Operating temperature up to 400° C (750° F)
temperatur Final cut temperature up to 565° C AET (1050° F)
  Common data
diameter Receiver capacity 12 x 500 ml
temperatur Max ambient temperature 25° C
stromversorgung Mains supply 3 x 208 – 250 V, 50 Hz (60 Hz upon request)
efficiency Power consumption 8000 W (without options)
dimensions Dimensions (w x h x d) approx. 2.30 x 2,90 x 0.90 m